PERMANENT FORMWORK INSTALLATION

12, 16, 20 and 24 mm thick plates can be used as elements of permanent formwork for concrete foundations, walls, mansard walls and floor structures in buildings with different number of floors.



Advantages:
Perfect adhesion to concrete.
Formwork is installed very quickly.
It is easy to maintain finishing works for ground floor and exterior walls due to the flat surface of CBPB. The additional levelling is not required.
Moisture resistance, biostability and frost resistance allow to apply TAMAK CBPB in formworks for concrete foundations, ground floors, basement areas.
Heavy suspension structures can be fixed to CBPB.



Constructions with CBPB
Application instructions
Calculation of the number of DSP sheets and screws
To install a «floating» floor (on insulation), 10-12 mm thick CBPB plates should be laid in two layers. The upper plate overlapping the joint of the lower plates must be fixed to both plates. To install a floor on joists, 20-24 mm thick CBPB plates are used. In this case, the distance between the joists should be no more than 400 mm. CBPB plates are laid perpendicular to the joists and fastened at intervals of 300 mm.
Room length, m
Choose application
Room width, m
Choose CBPB length
Amount of CBPB plates needed: 0 pcs
Amount of fastening screws needed: 0 pcs
Send a request for CBPB
Other applications
Processing and fixing CBPB
  • - CBPB fastening with nails.
  • - CBPB fastening with screws.
  • - Joints (installation and execution).
  • - Edges and joints.
  • - Cutting.
  • - Drilling work.
  • - Milling work.
  • - Grinding.
  • - Painting.
  • - Plastering.

Any more questions?
Contact us!







We will answer any questions about the product, price and time of delivery.
We will specify availability of required product volumes in the warehouse.
We will calculate the discount depending on the required volume.