INSTALLATION OF GARDEN PATHS, FENCES AND OTHER ELEMENTS

Garden paths

20, 24, 36 mm thick TAMAK CBPB can be applied for garden paths installation due to moisture resistance, frost resistance and natural biostability of the material. CBPB are cut to 200х200 mm, 300х300 mm, 400х400 mm boards and are put together to puddled sand mat or directly on the ground without additional treatment with hydrophobisators.

Attention! In case of application of CBPB with large geometrical sizes, the so called «boat effect» may occur – the edges of the boards may turn up a little bit because of uneven hydration and drying out of boards from the side of the ground and open air.

Fences

ТАМАК CBPB can serve as column facing, filling in embrasures of strut beams and decorative packing blocks. Due to high adhesion to all types of paintwork, not only high durability of the coating is guaranteed, but also easiness of painting and renovation.

Curbs

CBPB can be used as curbs. The curb is installed to puddled sand mat or directly on the ground without additional treatment with hydrophobisators.

Constructions with CBPB

Calculation of the number of DSP sheets and screws

To install a «floating» floor (on insulation), 10-12 mm thick CBPB plates should be laid in two layers. The upper plate overlapping the joint of the lower plates must be fixed to both plates. To install a floor on joists, 20-24 mm thick CBPB plates are used. In this case, the distance between the joists should be no more than 400 mm. CBPB plates are laid perpendicular to the joists and fastened at intervals of 300 mm.

Room length, m

Choose application

Room width, m

Choose CBPB length

Amount of CBPB plates needed: 0 pcs
Amount of fastening screws needed: 0 pcs

Send a request for CBPB

By pressing the button “Send feedback” I accept the terms of the User agreement and agree to the processing of personal data in accordance with the Federal law of the Russian Federation of July 27, 2006 no. 152-FZ “On personal data”.

Other applications