FACING WITH CBPB
Surface treatment of cement-bonded particle boards attention! Regardless of the ways of CBPB surface treatment, it is strongly recommended to apply a first coat to surfaces and edges.
FACADE PAINTING OF CBPB ТАМАК. SYSTEM WITH SEEN DILATATION JOINTS
| Priming coat, 1 layer | Finishing payment, 2 layers | Producer |
|---|---|---|
| Disbon 481 | Caparol Thermo San NQG. Façade paint on the base of silicon resin. | Caparol |
| Tiefgrund TB | Amphibolin - Caparol. Acrylic paint. | Caparol |
| CapaSol LF | Caparol Acryl - Fassadenfarbe. Acrylic paint. | Caparol |
| Caparol Sylitol 111 Konzentra - silicate priming coat on the base of liquid glass. | Silitol-Fin. Mineral paint. | Caparol |
| Malech / Elastocolor Primer | Elastocolor. Elastic paint on the acrylic paint base. | MAPEI |
| ВД-АК-18 (Shagren). Water-dispersive acrylic paint. | ЛАЭС, г. SAMARA | |
| ВД-АК-18 (Shagren). Water-dispersive acrylic paint. | ЛАЭС, г. SAMARA | |
| ВД-АК-035 | ВД-АК-117. Water-dispersive acrylic paint in two layers. | PIGMENT, Tambov |
| Priming coat strengthened Bolars | Structure. Textured Bolars on the base of acrylic dispersion. | Bolars, Moscow |
| Primer Fasade | Alpha Coat. Textured paint, blind waterborne quartziferous. | Sikkens |
FACADE PAINTING OF CBPB ТАМАК. SYSTEM WITH CLOSED DILATATION JOINTS.
| Priming coat | Finish painting, 2 layers | Producer |
|---|---|---|
| Prime coat Malech / Elastocolor Primer | Elastocolor – elastic paint on the acrylic base | MAPEI |
PLASTERING
FACADE PLASTERING CBPB ТАМАК. SYSTEM WITH SEEN EXPANSION JOINTS OR JOINTS CLOSED WITH DECORATIVE LATHS.
Structure scheme of an open expansion joint for compensation of linear changes, caused by thermo-moisture influence.
| Base | Priming coat, 1 layer | Finish plastering | Producer |
|---|---|---|---|
| Extra" glue + cement М500Д0 Fibreglass mesh alkaliproof | Facture plastering "Fine" ЛАЭС. | ЛАЭС, SAMARA | |
| Capillary | Fresque – decorative relief paste with fibre facture | Max decor | |
| Optimist G – 103. GК "Optimist", ООО "Tyaga" | Finish plaster, elastic plaster, polymeric mineral plaster | GК Stena, Izhevsk | |
| Optimistic G103 | Manna D - 708 | GК "Optimist". ООО TYAGA, Moscow | |
| Akrylit-06 PG | Acrylit 415, elastic plaster | ООО NPO «Oliva» | |
| Primeseal | Stuc-O-Flex | Representative office in Russia – Publishing house "Beautiful houses press | |
| PrimerFasade | ANEROC 80 –TRIMETAL Acrylic decorative plaster with bark texture Finishing with paint AlphaTopCoat (2 layers) | Sikkens |
FACADE PLASTERING CBPB ТАМАК. SYSTEM WITH CLOSED EXPANSION JOINTS
The scheme of closed expansion joint
| Preparation | Base layer | Finish plaster | Producer |
|---|---|---|---|
| Priming coat Malech.Spackling with the help of Mapetherm AR2 and net MapethermNet (a lath of the net having width 33 cm is put on the expansion joint) | Mapetherm AR2 on the whole territory by armouring with the net MapethermNet in the middle layer | SilancolorTonachino- decorative plaster on the silicone base | MAPEI. |
| Capillary | Fresque - decorative relief paste with fibre facture | Max decor | |
| Spackling with the help of KerabondT + latex Isolastic and net MapethermNet (a lath having width 33 см is put on the expansion joint) | Priming coat Malech spreading Mapetherm AR2 on the whole territory by armouring with the net MapethermNet in the middle layer | SilancolorTonachino- decorative plaster on the silicone base | MAPEI. |
| For closing of the expansion joint at the junction of CBPB ТАМАК having thickness 12mm one can put a cord made of expanded polyethylene (Vilaterm) into the seam Ø 8мм, then elastic spackling "JointCompound" | Priming coat "Stuc-O-Base" | Stuc-O-Flex | Stuc-O-Flex Representative in RF Publishing house «Beautiful houses» Moscow |
| Repairing the seams with acrylic sealer Accent 117 | Extra Flex" elastic glue + CEMENT М500Д0. Glassnet alkaliproof, buried into glue | Sahara Flex- elastic plaster | ZАО PК ЛАЭС, Samara |
| Glued armouring mass KlebeundSpachteImasse 190 grau+ armouring net 650. | Priming coat Caparol-Putzgrund with quartz filling | Capatect-Fassadenputz R 30 | Caparol |
| Priming coat Optimist G – 103, Producer GК "Optimist" | Finish plaster, elastic plaster, polymer-mineral plaster | GК Stena, Izhevsk | |
| Priming coat Optimist G – 103, Producer GК "Optimist" | Finish polymer-mineral plaster "Rain" | GК Stena, Izhevsk |
NOTICE
When making finish works it is necessary to follow the instructions for applying material systems of this very producer.
The least demanding concerning the quality of the finished surface are texture paints that is why namely they are recommended for self-facade painting with a roller. Not textured (glossy) paints are recommended to be applied only for specially prepared surfaces with sunk and spackled screws.
RECOMMENDATIONS ON USING THE SCREWS
For fixing CBPB ТАМАК to the frames on the facades, it is recommended to apply galvanized or anodized self-tapping crews (hereinafter - screws), as black (phosphated) can corrode under the atmospheric moisture exposure, and together with this they lose their strength qualities, and rust can appear through finish surface.
PREPARATION OF CBPB ТАМАК SURFACE FOR HOLDING FACADE FINISH WORKS
Before painting it is necessary to prepare CBPB surface as follows:
- To deepen all screws for 1-2 mm;
- To spackle all holes and detrusions with facade spackles, for example, produced by the company ЛАЭС "Spackle under painting" + cement М500Д0;
- After drying of the spackle to rub down all the unevennesses with flint-paper;
- To clean a plate surface from dust with a wet duster;
- To level CBPB surface absorption to deposit with a roller or a brush a priming coat o f a deep penetration on all sides of the plate including borders;
- Plate borders are easier treated with a priming coat not each sheet separately, but at the moment when the plates are in the pack;
- Then to apply finish materials in accordance with the instruction given by a producer.
